|
HARRIS 883 SHEAR |
Heavy-duty shear with cuttingforce of 807
tonnes and shear throat width of 36 inches. Feeder Box dimensions 2464
x 6706 x 1448mm. Processes 11-18 tonnes per hour. |
|
|
HARRIS 803 SHEAR |
Heavy-duty shear with cutting force of 800
US tonnes and shear throat width of 36 inches. Feeder Box dimensions
2464 x 6706 x 1448mm. 3-5 cuts per minute. |
|
|
Shredder mobile |
Portable fragmentizer which has only
worked for about 6 months in very good condition. 400 hp diesel motor
and opening width of 2000mm.
The machine has a single rotating shaft with cutting tips, which cut
material against an anvil. There are 48 cutting blades arranged in
four rows around the rotor. There are currently 6 inch grates in the
machine as it is being used for tyres, waste and irony aluminium, but
other sizes can be fitted webshop starten
|
|
|
Harris HRB8 baling press |
Paper/Cardboard Baler, producing bale
weights of for example, corrugated - 500-635 Kg, non-ferrous - 318-725
Kg and solid waste - 816-1043 Kg. |
|
|
Seram 6525E Crane |
Equilibrium crane with reach of 25m,
lifting capacity of 65 tonnes and lifting capacity at full reach of
3250kg. |
|
|
Seram 3515E Crane |
Equilibrium crane with lifting capacity of
35 T.m, maximum reach of 15m and lifting capacity at maximum reach of
15m. |
|
| Harris
TGS25 |
Metals
Baler producing 12"x12" bales, fully refurbished and
up-graded to modern computer controls and hydraulics, supplied
virtually as new. A heavy-duty machine,
capable of baling both ferrous and non-ferrous metals. |
|
|
74/104 Universal Hammermills
Shredder |
Refurbished with a rebuilt
box, new liners, grates, hammers, caps, pins and other miscellaneous
wear parts, new skirt boards, new feed chute supports, rebuilt teeth
on double feed rolls. The double feed roll assembly with Hagglunds
hydraulic drive, and the Riverside rotor, are only a few years old
with less than 150K tons processed since new. London LED Lighting Supplier UK
|
|
| Copex
615 Shear
|
Heavy-duty
shear in excellent condition, 16 years old. Shear force of 615
tonnes, 5 metre charging box and pusher force, lid force and side
squeeze force of 150 tonnes. |
|
|
Lefort
Alligator Shear |
Refurbished,
600mm blade |
|
|
Harris
TGS6034 Baler |
The
used TG6034 currently available is a high production machine,
capable of producing bales measuring 36” x 24”. The machine has
been working in a steel works producing bales from coil ends etc. It
is in good condition and has been thoroughly maintained throughout
its ten year contract. It is being sold because the contract was
lost to another company who decided to purchase new. It was running
well up to the day it was decommissioned. It is structurally
completely sound, as it has a protective outer casing, and can be
brought up to “as new” very easily. audit tools software
|
|
Henschel
800 tonne shear
|
Heavy-duty
static shear in good condition, with a shear force of 846 tonnes,
blade width of 1050mm and 6 metre box. |
|
|
Lindemann
Zerdirator Shredder |
Hammermill
shredder for scrap metals, in good condition, complete with feed
ramp, hydraulic pin puller, spare rotor, spring base and Cardan
shaft and 3000 hp motor. The rotor was new in 1996. |
 |
|
Small
hammermill shredder |
Fully
refurbished, heavy-duty machine, 20 hammers, 60hp rotor, 560x560mm
chamber. |
|
|
Metpro
Granulation System |
Including
feed conveyor, primary granulator, separation bed with overband
magnet, further granulator, air and water separation table with
recycling tanks, complete dust extraction plant. All in good working
order. |
 |
|
SSI
Contra-Rotating Shredder |
This is a large
contra-rotating machine in pristine condition –it is only 2-3
years old and has not had heavy use. With a 400hp motor and a
shredding chamber of 1320 x 1905 x 785mm, the machine is suitable
for a wide range of materials, including mixed solid waste, wood
etc. |
|
Sant’Andreas
Contra-rotating Shredder
|
A
fully refurbished contra-rotating shredder, suitable for rubber,
metal drums, cardboard, pallets, plastic, electrical appliances,
municipal waste, glass etc. Tonnages depend on material – tyres,
for example, will shred at approximately 10 tph (car) and 5 tph
(lorry). 55kW motor.
|
|
| Trommel |
The
trommel measures 1m x 3m and currently has 50mm grid holes |
|
|
Harris TGS204 Baling Press |
This machine is available fully
refurbished and brought up to modern standards. This is a heavy duty
machine, suitable for ferrous and non-ferrous metals.
Make Harris
Model TGS204
Bale Size 16" x 20" 16"/variable
Press Box dimensions 120" x 50" x 40"
First Compression 95 tons
Second Compression 376 tons
Third Compression 376 tons
Power 1 x 125hp, 1 x 3hp, 1 x 5.5hp, 1 x ½hp,
1 x 25hp
|
|
